IDL Displays - POP Displays
Login / Create Account
English
1-877-579-1882 Beemak-IDL
Shop for POP Display Accessories and Print Holders
0 ITEMS
$0.00

Magnetic Ceiling Display Systems, Ring Magnet and Magmover

Clik-Clik Systems Inc. magnetic ceiling display systems allows businesses to create unique display solutions for poster and banners. The Clik-Clik system makes ceiling display installation easy, and the display systems enable changes up to 20 feet high without the use of a lift or a ladder. These magnetic display systems use innovative telescopic installation pole extenders, equipped with ring magnets to ensure your ceiling displays are held firmly in place. Browse the selection of magnetic ceiling display systems and accessories below to find the one that’s right for your display needs!

 

How to Determine Line Length For A Ceiling Display

  1. Extend your MagPole and MagMover until it touches the ceiling.
  2. Visualize on the MagPole where you want the bottom of your sign to be. For example, the 3rd hole down on the second segment.
  3. Lay your MagPole on the ground.
  4. Position the bottom of your sign at the visualized spot.
  5. Take a roll of LoopLine and loop the end of the LoopLine onto a Ring Magnet. Position it as usual onto the MagMover, then walk to the sign grommet, allowing the LoopLine to unspool. Pull it snug and cut the LoopLine.
  6. Click a second Ring Magnet to the first, then measure and cut an identical length of LoopLine for the other side.
  7. Now loop both free ends of the LoopLine to your sign, and you’re ready for installation.
 
MGM10402 Product Info
Beemak-IDL
MGM10402
Dual MagMover 6"

MGM10402

Dual MagMover 6"

  • Provides up to 2 suspension points
  • The 6″ Dual MagMover has two ‘posts’ (spaced 6″ apart) and is used to hold up to two Clikmagnets. It is ideal for items that have up to two attachment points.
  • Great for signs and most P.O.P displays
  • Note: RingMagnets can be placed on the posts so displays can be suspended from walls & ceilings
  • Take Down: Each post has a corkscrew. When it is time to remove your items, rotate out the corkscrews and insert fully into the ring of the ClikMagnet and ‘pull’. The curls of the corkscrew holds the item from falling to safely bring it down.

Dual MagMover 6"

MGM10406 Product Info
Beemak-IDL
MGM10406
Multi MagMover

MGM10406

Multi MagMover

  • Provides up to 6 suspension points
  • For long banners, garlands, fabric draping or stringing twinkle lights across the ceiling

Multi MagMover

MGM18000 Product Info
Beemak-IDL
MGM18000
MagPole - Extends to 18' ft

MGM18000

MagPole - Extends to 18' ft

Sturdy aluminum and fiberglass extension pole specifically designed for the display industry. 5 telescopic sections allow for a height range 5'3" to 18' ft.

For use with the Magmover system.

MagPole - Extends to 18' ft

MGM94290 Product Info
Beemak-IDL
MGM94290
Single MagMover

MGM94290

Single MagMover

  • Allows for a single suspension point
  • Perfect for small items such as hanging mobiles that can rotate in air currents

Single MagMover

MGM95270 Product Info
Beemak-IDL
MGM95270
Super RingMagnet

MGM95270

Super RingMagnet

  • Holds up to 10 lbs / 4 kg
  • Use with any of the MagMover styles

Super RingMagnet

MGM94300 Product Info
Beemak-IDL
MGM94300
Regular ClikMagnet Black

MGM94300

Regular ClikMagnet Black

  • Holds up to 5 lbs / 2 kb.
  • Use with any of the MagMover styles
  • Sold by the bag - 20 pieces per bag

 

Regular ClikMagnet Black

701-LOOP Product Info
Beemak-IDL
70123 | 70124 | 70126 | 70133 | 70144
LoopLine

70123 | 70124 | 70126 | 70133 | 70144

LoopLine

  • Spool of 2" (5 cm) repeating loops forming a patented line that never needs knotting
  • Tested for mid weight 25lbs
  • LoopLine is reusable and allows for quick display changes
  • Use with Magmover system
  • Two methods to attach LoopLine to a ClikMagnet

    1. Insert the loop of one end of the LoopLine through the ClikMagnet ring and bring this loop fully over and around the ClikMagnet. The line will rest around the ring. Pull tight.

    2. Insert one end loop of LoopLine through the ring of the ClikMagnet and pull the other end of the line through the first loop. Pull tight.

     

    Two methods to attach LoopLine to your item to be hung

    1. With the ClikMagnet on one end, insert the other end’s loop through the grommet/hole. Put the ClikMagnet fully through this loop and pull tight.

    2. Put one end loop of LoopLine through the grommet/hole in the item. Put the other end loop through this loop and pull tight. Add the LoopLine to the ClikMagnet with the above method # 1.

     

     

70123
70133
70124
70144
70126

LoopLine

70123
70133
70124
70144
70126

MGM95277 Product Info
Beemak-IDL
MGM95277
Super ClikMagnet White

MGM95277

Super ClikMagnet White

  • Holds up to 10 lbs./4 kg
  • Use with any of the Magmover accessories
  • Sold by the bag - 10 magnets per bag



Super ClikMagnet White

MGM95288 Product Info
Beemak-IDL
MGM95288
Super ClikMagnet Black

MGM95288

Super ClikMagnet Black

  • Holds up to 10 lbs/4 kg
  • Use with any Magmover accessory
  • Sold by the bag - 10 pieces per bag

Super ClikMagnet Black

MGM94299 Product Info
Beemak-IDL
MGM94299
Regular ClikMagnet White

MGM94299

Regular ClikMagnet White

  • Holds up to 5 lbs/2kg
  • Use with any of the Magmover accessories
  • Sold by the bag - 20 magnets per bag

Regular ClikMagnet White

701 Product Info
Beemak-IDL
70155 | 70165
Loopline - Light - 5 lb/2 kg

70155 | 70165

Loopline - Light - 5 lb/2 kg

  • Spool of 2" (5 cm) repeating loops forming a patented line that never needs knotting
  • Tested for 5 lb/2 kg.

LoopLine is reusable and allows for quick display changes

Use with Magmover system

 

Two methods to attach LoopLine to a ClikMagnet

1. Insert the loop of one end of the LoopLine through the ClikMagnet ring and bring this loop fully over and around the ClikMagnet. The line will rest around the ring. Pull tight.

2. Insert one end loop of LoopLine through the ring of the ClikMagnet and pull the other end of the line through the first loop. Pull tight.

 

Two methods to attach LoopLine to your item to be hung

1. With the ClikMagnet on one end, insert the other end’s loop through the grommet/hole. Put the ClikMagnet fully through this loop and pull tight.

2. Put one end loop of LoopLine through the grommet/hole in the item. Put the other end loop through this loop and pull tight. Add the LoopLine to the ClikMagnet with the above method # 1.

70155
70165

Loopline - Light - 5 lb/2 kg

70155
70165

MGM95570 Product Info
Beemak-IDL
MGM95570
Round ClikMagnet #10

MGM95570

Round ClikMagnet #10

  • Holds up to 10 lbs/4 kg
  • Use with any of the Magmover accessories
  • Sold by the bag - 10 magnets per bag
  • Can also be used with flathats

Round ClikMagnet #10

MGM95600 Product Info
Beemak-IDL
MGM95600
Round ClikMagnet #20

MGM95600

Round ClikMagnet #20

  • Holds up to 20 lbs/9 kg
  • Use with any of the Magmover accessories
  • Sold by the bag - 10 magnets per bag
  • Can also be used with flathats
  • Use where a superior hold is needed.

Round ClikMagnet #20

WALL CLIK Product Info
Beemak-IDL
WALL CLIK
WallClik Magnet

WALL CLIK

WallClik Magnet

  • Powerful neodymium magnets hang up to 8 lbs/3.6 kg
  • Attaches to clean, vertical ferrous metal surfaces
  • Sold by the bag - 10 magnets per bag
  • Other colours available by special order

WallClik Magnet